Buyer Requirements Details

Rota Cone Vaccum Dryer

Posted Date: 01-Nov-2018

Product Description

pharmaglobiz Buyer From Nepal Have Require 500 Ltr. Rota Cone Vaccum Dryer


Minimum Order Quantity :
1 Set
Approx Price :
Kathmandu, ., NEPAL

More Information

urs No.
Ime/urs/00
Capacity
500 Ltrs
Qty Required
1 Set
Working Capacity: 500 Litres
I/p Quantity (in Kgs): Vendor To Specify
Heat Source: Saturated Steam
Utility: Chilled/cooled Water
Bulk Desity: 0.3-0.9 Gm/cc
Feed Material : Wet Cake Of Herbal Extracts
O/p Material Moisture: Nmt 1%
Shape: Double Cone
Heat Transfer Area: Vendor To Specify
Size: Vendor To Specify (ratio Should Be Standard)
Rpm: 6-8 Rpm
Surface Finish: Inside And Outside 210 Grit Polish.
Motor Make: Crompton
Feed Manhole: 350 Nb
Discharge Nozzle: 150 Nb
Condenser : 1 Nos. (required)
Size: Vendor To Specify (ratio Should Be Standard)
Capacity: Vendor To Specify (ratio Should Be Standard)
Reciever: 1 Nos. (required)
Size: Vendor To Specify (ratio Should Be Standard)
Shape: Vendor To Specify
Capacity: Vendor To Specify (ratio Should Be Standard)
Cyclone: 1 Nos. (required)
Size: Vendor To Specify (ratio Should Be Standard)
Capacity: Vendor To Specify (ratio Should Be Standard)
Interconnections: All Kind Of Interconnecting Pipeline And Valves Need To Be Provided
M.o.c:-
I) Inner Shell: Ss 316, 5.0 Mm Thk.
Ii) Cone Ends: Ss 316, 5.0 Mm Thk
Iii) Jacket: Ss 304, 4.0 Mm Thk
Iv) Insulation Cladding: Ss 304, 2.0 Mm Thk
V) Frame: Ms/ss 304
Vi) Frame Cover: Ss 304, 2.0 Mm Thk
Vii) Condenser: Ss 304
Viii) Reciever: Ss 304
Design Parameter :-
I) Inside Working Pressure: 2 Kg/cm², Full Vaccum
Ii) Inside Test Pressure: 2 Kg/cm², Full Vaccum
Iii) Inside Design Pressure: 4 Kg/cm²
Iv) Jacket Working Pressure: 4.5 Kg/cm², Full Vaccum
V) Jacket Test Pressure: 5 Kg/cm²,
Vi) Jacket Design Pressure: 6 Kg/cm²
Feed Manhole: 350 Nb
Discharge Nozzle: 150 Nb
Rcvd Should Consist Of Chain Drive/gear Type, 5 Hp Flp Motor Running With 6-8 Rpm.
It Also Consists Of Vaccum, Vaccum Release, Thermowell, Steam Inlet, Condensate Outlet Connections, Pressure Gauge, Safety Valve Vent Provision, Vent At Jacket And Other Standard Connection.
Insulation With Ss 304 Cladding: Mineral Wool Insulation Of Thickness Nlt 50mm Wrapped On A Chicken Mesh Covering Entire Jacket Area And Cladded With Ss 304 2mm Thk. Sheet Covering All The Corners, Joints & Ends Will Be Argon Welded And 210 Grit Polished
Vfd(optional At Extra Cost): 5.0 Hp With Panel Board
Note : Equipment Drawing Will Be Provided By Vendor Before Fabrication For Our Approval After Confirm P.o Is Raised.

Related Buyer Requirements